Bridgeport EZ Trak SX Mill w/Rebuilt 2 HP Head(upper), PDB, New Screen, USB

Bridgeport Series 1 EZ Trak SX Vertical Mill,
Rebuilt 2HP Variable Speed Head(Upper Half),
Kurt Power Drawbar,
R8 Spindle,
Chrome Ways,
New Led Screen,
New Keypad,
New Mother Board,
New Static Hard Drive,
New USB Drive,
New X Axis Armature Cable,
New Z Axis Scale,
Auto Lube System,
Table size: 9" x 48"
Longitudinal travel: 33.5"
Cross travel: 12"
Vertical travel of knee: 14"
Quill travel: 5"
Spindle speeds: 60 to 4200 RPM (infinitely variable)
Spindle quill feeds: 0.0015" – 0.003" – 0.006"
Ram travel: 12"
Positioning speed (X-Y axis): 100 inch / minute
Feed rate range (X-Y axis): 0.1 to 100 inch / minute
Throat: 6-3/4" to 18-3/4"
Distance table to spindle nose: 2-1/2" to 18-1/4"
Motor: 2 HP/1735 RPM
Volts: 230/460 Currently wired for 230V 3 phase
Phase: 3
Cycles: 60
Full load amps: 6.2/3.1
Approximate dimensions: 70" x 77" x 87" high
Approximate weight: 3,000 lbs.