Bridgeport EZ Trak DX Vertical Mill w/Rebuilt 2 HP 30 Taper Head, New Controller, Tooling

Bridgeport Series 1 EZ Trak DX Vertical Mill,
Rebuilt 2HP Variable Speed Head (Top Half & Bottom Half)
30 Taper Spindle w/33 various 30 Taper Holders,
Chrome Ways,
Many New Items Installed:
New Control Box
New Led Screen,
New Keypad,
New Mother Board,
New Static Hard Drive,
New USB Drive,
New X Drive,
New Encoder Cable,
New Power Supply,
New Bull Gear Assembly,
New Front & Back Pulleys,
New Castle Nuts,
New Belts,
New Bearings,
New Brake Spring,
New Lip Seal,
New 6” Machinist Swivel Vice,
Auto Lube System,
Table size: 9" x 48"
Longitudinal travel: 33.5"
Cross travel: 12"
Vertical travel of knee: 14"
Quill travel: 5"
Spindle speeds: 60 to 4200 RPM (infinitely variable)
Spindle quill feeds: 0.0015" – 0.003" – 0.006"
Ram travel: 12"
Positioning speed (X-Y axis): 100 inch / minute
Feed rate range (X-Y axis): 0.1 to 100 inch / minute
Throat: 6-3/4" to 18-3/4"
Distance table to spindle nose: 2-1/2" to 18-1/4"
Motor: 2 HP/1735 RPM
Volts: 230/460 Currently wired for 230V 3 phase
Phase: 3
Cycles: 60
Full load amps: 6.2/3.1
Approximate dimensions: 70" x 77" x 87" high
Approximate weight: 3,000 lbs.