Sharp 3 Axis Knee Mill LMV-50 w/ACRA 3HP VS Head, AcuRite MILLPWR G2 TURNKEY CNC SYSTEM

Sharp 3 Axis Knee Mill LMV-50 w/ACRA 3HP VS Head, AcuRite MILLPWR G2 TURNKEY CNC SYSTEM

This is a simple, easy to use 3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming. The CNC system is built on the top quality SHARP vertical mills frame.

9 x 50” table,

11 x 32 x 5” travel,

Vari speed

AcuRite Millpwr G2 CNC3 axes control (Longitudinal, Cross)

G code and conversational type programming

3 axes precision ball screws

Safety handwheels

Auto lube system

3 axes Digital Readout System (table, saddle, quill)

MILLPWR G2 TURNKEY CNC SYSTEM W/SOFTWARE AND HARDWARE

Dimension Functions:

ABS/INC, POLAR/CARTESIAN, INCH/METRIC.

Programming:

PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS)

HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),

CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE

Special Features:

CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.

Run Options:

SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.

Calculator Functions:

GEOMETRY, TRIG.

HARDWARE

Operator Console:

EASY TO USE FORMAT. CONVERSATIONAL ENGLISH. THREE DIMENSIONAL HARD KEYS. 10” FLAT PANEL, COLOR LCD DISPLAY. REMOTE STOP/GO SWITCH.

Controller Cabinet:

HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.

USB AND RS232 INTERFACE

1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS

115VAC – 20 AMPS

SPECS

Table Size 9 x 50 in.

T-slots (No., Size, Pitch) 3, 5/8, 2.5 in.

Table Travel : X Longitudinal 32 in.

Table Travel : Y Cross 11 in.

Quill travel: Z Vertical 5 in.

Ram Travel 12 in.

Knee travel : Vertical 16 in.

Spindle Center to Column 6.75-18.5 in.

Spindle Nose to Table Top 2.12-18 in.

HEAD, SPINDLE

Spindle Nose Taper R-8

Spindle Variable Speed Range 60 - 4,500 rpm

Spindle Motor (220V/440V) 3 HP

Quill Feed (Inch/Rev)(3 speeds) 0.0015, 0.003, 0.006 in.

Head Tilt Angle (L/R) 45°

Head Tilt Angle (Up/Down) 45°

GENERAL

Floor Area (W x D x H) 7 x 6.5 x 7 ft.

Approximate Weight 3000 lbs.

Power Consumption (220V) 3 KVA/15 amps

Power Consumption (440V) 3 KVA/7.5 amps

Standard Accessories

Millpower G2 3-axis CNC system

3-axis ball screws and servo drives

Auto lube system

3-axis Digital Readout system

Cross Way cover

Optional Accessories

6” “Kurt” Vise

R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”, 3 chucks

Halogen Work light