Climax M72 KEY MILL

Climax M72 (same as a KM4000) KEY MILL
Specification
Overall length 18.5 inches 469.9 mm
Overall width 14.0 inches 355.6 mm
Overall height 13.25 inches 336.6 mm
Base size 9.0 x 18.5 inches 228.6 x 469.9 mm
Slide travel, longitudinal 7.88 inches 200.2 mm
Slide travel, transversal 2.0 inches 50.8 mm
Vertical travel max 3.0 inches 76.2 mm
Power, pneumatic 1.2 Hp 0.9 kW
Power, hydraulic 4.0 Hp 2.98 kW
No load variable spindle speed
minimum 350 rpm maximum 675 rpm
Spindle hole diameter 0.75 inches 19.1 mm
Maximum end mill diameter 1.25 inches 31.75 mm
with optional chain clamp 24.0 inches 609.6 mm
with optional shim kit 4.0 inches 101.6 mm
Minimum clamping space required on stub shaft 8.0 inches 203.2 mm obstructed shaft 10.5 inches 266.7 mm
One end mill included Ø 0.75 inches Ø 19.1 mm
Operating weight 195 lbs. 89 kg
Shipping weight (with speed control) 250 lbs. 114 kg
Shipping dimensions 24 x 24 x 19 inches 610 x 610 x 483 mm
Machining Ability Example
Material C1018 steel
Metal removal rate 1 inch 3/minute 16.4 cm3/min
Keyway dimensions 1.0 x 0.5 x 8.0 inches 25.4 mm x 12.7 mm x 203.2 mm
Cutting Time 3 minutes and 10 seconds 3 minutes and 10 seconds
High quality, heavy-duty machine
Cuts new keyways up to 3.25 inches (82.6 mm) wide and 7.88 inches (200.2 mm) long in one setup.
Two-inch (50.8 mm) lateral travel allows cutting wide pockets or slots with a single end mill.
Universal type motor and triple gear reduction provide plenty of torque.
Permanently sealed lubrication, so machine can be operated at any angle.
The leadscrew is a precision Acme thread and is fitted with roller thrust bearings.
Anti-friction bearings used throughout.
Dovetail ways machined for smooth movement in both longitudinal and transversal directions.
Features zeroing-type adjusting dial for controlling cutter depth.
Contoured base is self-centering and self-aligning on the shaft.
Electronic speed control offers precision control of spindle speeds while retaining full torque over available rpm range.
Compact, easy to set up, versatile
Needs only 8.5 inches (215.9 mm) of shaft for clamping, or only 10.5 inches (266.7 mm) of shaft for clamping from an obstruction.
Mounts on shafts from 4 – 24 inches (101.6 – 609.6 mm) in diameter.
Mounts anywhere along the shaft.
Rapid longitudinal travel can be made with a drill motor for quick setups.
Technical Data
0.75 inches (19.05 mm) is the standard spindle size for inch-machines.
20 mm (0.79 inches) is the standard spindle size for metric machines.
Many different machine variations are possible
Excellent Condition