Kingston HL2000 25″ Swing

Excellent Condition Comes with Steady rest and Follower rest,
3 Jaw Chuck
SPECIFICATION HL 2000
GENERAL:
Swing over bed 533 mm (21in)
Swing over cross slide 340 mm (13.12in)
Swing in gap (gap bed lathe) 720 mm (28.12in)
Height from floor to work center 1,040 mm (40.93in)
Max distance between center 2,032 mm (80in)
HEADSTOCK Hole thru spindle 80 mm (3.12in)
Spindle nose A1-8
Number of speed changes 12
Range of spindle speeds 25-1500 r.p.m.
GEAR BOX Number of feed changes 76
kinds Range of feeds per revolution:
longitudinal in inch 0.003 – 0.0424 in metric 0.049 – 0.679
Cross 1/2 against longitudinal feed THREADS
Leadscrew diameter and threads per inch 35 mm (1.37in) 4 TPI (P= 6 mm)
Threading range whitworth 4 to 56 TPI – 40 kinds Mertic 0.5 to 7 mm – 20 kinds Module 0.5 to 7M – 20 kinds D.P. 4 to 28 D.P – 19 kinds
CARRIAGE AND COMPOUND Compound rest top slide travel 110 mm (4.31in)
Cross slide travel 360 mm (14.18in)
TAILSTOCK Quill diameter 80 mm (3.09in)
Spindle travel 150mm (5.87in)
Center MT No. 5
BED Width of bed 370 mm (14.5in)
MOTOR Main drive motor 7.5 HP
FLOOR SPACE Floor space required Length x Width 4,035mm x 950mm WEIGHT Net weight (approx.) 2,870 KGS