2015 Amada () HA250W Horizontal Band Saw with Infeed & Outfeed Conveyers

“Excellent Condition”
10 NEW BLADES IN BOXES INCLUDED!!!
Machine Standard Features
9 Times Multi Index
Chip Conveyor
Diagnostic Lights
Index Floating Vise
Kerf Compensating Dial
Motion detector
Piece Counter
Pressure Flow Valve
Split Vise
Variable Blade Speed Drive
Zero Clamp Vise
Optional Accessories
Roller Table 6.5 ft (Included)
Roller Table 10 ft (Included)
Vertical Clamps ?
Vise Pressure Control ?
Capacity
Cutting Capacity Round (Diameter) 1.18″ – 10″ 30 – 250 mm
Rectangle (W x H) 11.8″ x 10″ 300 x 250 mm
Work Load Capacity 3307 lbs. 1500 kg.
Blade and Vise Operation
Saw Blade Dimensions (L x T x W) 11’6″ x 0.042″ x 1-1/4″ 3505 x 1.066 x 32 mm
Blade Speed 89-295 ft./min, 60Hz Stepless 27-90 m/min, 60Hz Stepless
Tension Control Manual-Slip Clutch
Blade Control Top Limit Setting Automatic Setting with Quick Approach Feeler
Cutting Control Oil Pressure Flow Control Valve
Vise Operation Type Main Split Vise and Rear Vise
Control Hydraulic Full-Stroke Cylinder
Motors
Motors Saw Blade Motor 5 HP 3.7 kW
Hydraulic Pump Motor 1 HP 0.75 kW
Cutting Fluid Pump Motor 1/4 HP 0.18 kW
Power Requirements
Power Requirements Power Supply Voltage AC220±10%, 3 PH, 60 Hz
(Or AC440V, 3PH, 60Hz)
Power Requirement 4.4 kVA
Cutting Fluid and Hydraulic
Cutting Fluid Tank Capacity 10.5 gal. 40 Liters
Pump Type Electric
Hydraulic Tank Capacity 7.9 gal. 30 Liters
Pressure Setting 384 psi 2.7 MPa(27 kgf/cm² )
Chip Disposal
Chip Disposal Chip Conveyor
Material Index
Material Index Index Mechanism Shuttle Vise
Stroke Input length per stroke 15.75″ (Maximum 9 times index)
Length 0.394″ – 141.7″ 10.0 – 3600 mm”
number of Input Stations 1
Number of Cut-Off Pieces 1-9999
Remnant Length 1.96″ 50 mm
Dimensions and Weight
Machine Dimensions (W x L x H) Head Up Position 78.6″ x 88.8″ x 74.0″ 1995 x 2255 x 1880 mm
Head Down Position 78.6″ x 88.8″ x 54.3″ 1995 x 2255 x 1378 mm
Table Height (Above Floor) 27.6″ 700 mm
Machine Weight 3,087 lbs. 1400 kg.