10" x 20" K.O. Lee B1020-29H Electro-Hydraulic Universal/OD Cylindrical Grinder
Have one to sell?
ConditionUsed
1 available
$7,950.00 USD
K.O. Lee 10" x 20" Electro-Hydraulic Universal/OD Cylindrical Grinder
Model B1020-29H
Buck 4" 6-jaw universal chuck,
5C collet drawbar
Fanuc MPG control.
5 HP 230/460 volt wheel head motor
Wired 230V 3 Phase
1/3 HP work head drive motor.
General & Capacity Specifications
• Swing Over Table / Capacity: 10 inches
• Distance Between Centers: 20 inches
• Table Swivel: ± 10 degrees
• Longitudinal Table Travel (Max): 24 inches
• Table Feed Rate: 0.1 – 150 IPM (Inches Per Minute)
• Spindle / Wheel Motor: 5 HP
Workhead Specifications
• Workhead Swivel: 135 degrees
• Spindle Speeds (Infinitely Variable): 35 – 700 RPM
• Hole Through Spindle (ID): 1.3" ID
• Center Taper: #5 MT (Morse Taper)
Crossfeed Specifications
• Crossfeed Rate: 0.1 – 75 IPM
• Crossfeed Travel (Max): 7.5 inches
• Handwheel Index Graduations: 0.0001"
Standard Equipment & Features
• Control: Fanuc MPG control
• Workhead: Motorized workhead
• Tailstock: Included
• Cycles: Plunge grinding cycle
• Support Systems: Built-in coolant system and auto-lube system
Imperial
| Swing | 10" |
| Centers | 20" |
| Wheel Power | 5 hp |
| Plunge | Yes |
| Control | CNC (Fanuc MPG control) |
K.O. Lee 10" x 20" Electro-Hydraulic Universal/OD Cylindrical Grinder
Model B1020-29H
Buck 4" 6-jaw universal chuck,
5C collet drawbar
Fanuc MPG control.
5 HP 230/460 volt wheel head motor
Wired 230V 3 Phase
1/3 HP work head drive motor.
General & Capacity Specifications
• Swing Over Table / Capacity: 10 inches
• Distance Between Centers: 20 inches
• Table Swivel: ± 10 degrees
• Longitudinal Table Travel (Max): 24 inches
• Table Feed Rate: 0.1 – 150 IPM (Inches Per Minute)
• Spindle / Wheel Motor: 5 HP
Workhead Specifications
• Workhead Swivel: 135 degrees
• Spindle Speeds (Infinitely Variable): 35 – 700 RPM
• Hole Through Spindle (ID): 1.3" ID
• Center Taper: #5 MT (Morse Taper)
Crossfeed Specifications
• Crossfeed Rate: 0.1 – 75 IPM
• Crossfeed Travel (Max): 7.5 inches
• Handwheel Index Graduations: 0.0001"
Standard Equipment & Features
• Control: Fanuc MPG control
• Workhead: Motorized workhead
• Tailstock: Included
• Cycles: Plunge grinding cycle
• Support Systems: Built-in coolant system and auto-lube system
We use cookies to improve your experience. Privacy Policy.