2020 CLAUSING 4VSQ40 5 HP 3 AXIS CNC VERTICAL KNEE MILL w/ACU-RITE MILLPWR G2 TURNKEY CNC SYSTEM

2020 CLAUSING 4VSQ40 5 HP 3 AXIS CNC VERTICAL KNEE MILL w/ACU-RITE MILLPWR G2 TURNKEY CNC SYSTEM

s/n P44202

Acu-Rite MILLPWR G2 Controller

Trico Spray Master II

Maxi Torque-Rite Power Draw Bar

10 x 54 Table

Ground Box Ways

5 HP head

40 Taper Spindle

Power Knee

One Shot Lube

Catalog Specs

MACHINE STYLE: KNEE MILL

SPINDLE SPEED CONTROL: VARIABLE SPEED

SPINDLE (HP): 5

TOTAL AMP DRAW @208V 3PH: 17

TOTAL AMP DRAW @230V 3PH: 16

TOTAL AMP DRAW @460V 3PH: 8

TABLE SIZE (INCH): 10 X 54

NUMBER T-SLOTS: 3

T-SLOT WIDTH (INCH): .638

T-SLOT CENTER DISTANCE (INCH): 2.08

TABLE WAY DESIGN: DOVETAIL

CROSS FEED WAY DESIGN: SQUARE

KNEE WAY DESIGN: SQUARE

X LONGITUDINAL TRAVEL MANUAL (INCH): 41.33

Y CROSS TRAVEL MANUAL (INCH): 15.4

KNEE TRAVEL MANUAL (INCH): 14

RAM TRAVEL MANUAL (INCH): 21.9

VARIABLE SPINDLE SPEED (RPM): 60 – 4300

VARIABLE SPINDLE SPEED LOW RANGE (RPM): 60 – 500

VARIABLE SPINDLE SPEED HIGH RANGE (RPM): 550 – 4300

SPINDLE TAPER: NMTB 40

SPINDLE QUILL TRAVEL (INCH): 5

QUILL FEED (IN/REV): .0015/.0031/.006

QUILL DIAMETER (INCH): 4.13

COLUMN TURRET DIAMETER (INCH): 13.39

KNEE WIDTH (INCH): 16.93

COLUMN BEARING LENGTH (INCH): 16.93

SADDLE/TABLE BEARING LENGTH (INCH): 20.28

RAM/TURRET BEARING LENGTH (INCH): 17.13

RAM LENGTH (INCH): 33.46

TABLE LOAD (LBS.): 1,108

MACHINE WEIGHT (LBS.): 3,190

VOLTAGE REQUIRED: 208/230/460 Currently wired 230V

PHASE: 3

MACHINE FOOTPRINT (LXWXH) (INCH): 77.6 X 106.3 X 88.8

SHIPPING WEIGHT (LBS.): 3,610

This is a simple, easy to use 3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming. The CNC system is built on the top quality Clausing vertical mills frame.

AcuRite Millpwr G2 CNC3 axes control (Longitudinal, Cross)

G code and conversational type programming

3 axes precision ball screws

Safety handwheels

Auto lube system

3 axes Digital Readout System (table, saddle, quill)

MILLPWR G2 TURNKEY CNC SYSTEM W/SOFTWARE AND HARDWARE

Dimension Functions:

ABS/INC, POLAR/CARTESIAN, INCH/METRIC.

Programming:

PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS)

HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),

CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE

Special Features:

CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.

Run Options:

SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.

Calculator Functions:

GEOMETRY, TRIG.

HARDWARE

Operator Console:

EASY TO USE FORMAT. CONVERSATIONAL ENGLISH. THREE DIMENSIONAL HARD KEYS. 10” FLAT PANEL, COLOR LCD DISPLAY. REMOTE STOP/GO SWITCH.

Controller Cabinet:

HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.

USB AND RS232 INTERFACE

1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS

115VAC – 20 AMPS