MV1200-S ADVANCE TYPE M800

Reduce small parts manufacturing costs with the highly-precise MV1200-S Advance M800 Mitsubishi Wire EDM. Featuring improved machine construction, auto-threading, internal machine communication and enhanced power supply technology, this innovative wire EDM machine includes a non-contact Cylindrical Drive System on the X & Y axis drives for reliability and Mitsubishi M800 series control with 19-inch touchscreen for easy operating.

SPECIFICATIONS

Machine Travels X x Y x Z: in (mm): 15.7 x 11.8 x 8.7 (400 x 300 x 220)

Maximum Workpiece Size W x D x H: in (mm): 31.9 x 27.6 x 8.5 (810 x 700 x 215)

Max. Submerged Workpiece Weight: lb (kg): 1102 (500)

Table Dimensions: in (mm): 25.2 x 17.7 (640 x 450)

U/V Travels (from center): in (mm): ±2.4 x ±2.4 (±60 x ±60)

Taper Angle @ Thickness: in (mm): 15 deg.@ 8.0 (15 deg.@ 200)

Wide Angle Taper (Optional Guides Required): 45 deg. @ 1.8" 45mm (No AT Possible)

Table Rapid Feed Speed: in/min (mm/min): 51.2 (1300)

Power Supply: V350-V

Minimum Drive Unit / Resolution: 0.000002 / 2 µin ( 0.00005 / 50nm)

User Program Storage [Hard Disk Size]: 1 GB [32 GB CFAST Card Size]

Wire Diameter Possible: in (mm): 0.004~0.012 (0.1~0.3)

Minimum Start Hole Diameter: in (mm): 0.02 (0.5)

Max. Wire Spool size STD [optional]: lb (kg): 22 [44] (10 [20])

Filters / Type: 2 pc. / Paper Cartridge

Filter Tank Capacity: gal (L): 145 (550)

Machine System Dimensions W x D: in (mm): 79.7 x 106.4 (2025 x 2702)

Machine Installed Height: in (mm): 79.3 (2015)

Machine System Weight: lb (kg): 5952 (2700)

Fluid System Weight: lb (kg): Included with machine

Power Requirements [KVA]: 200-230V [13.5] Built in AVR

Compressed Air Requirements: 2.7 cu.ft./min. @ 71~100 psi

OVERVIEW/FEATURES

• V350-V AEII Power Supply with Digital Spark Control
• DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
• Non-contact, Zero Back-Lash Linear Shaft Drive System XY (UV-Z use ball screws)
• All Fiber Optic servo control (4X faster internal communication speed)
• Submerged Machining to 8.7″ Deep
• Automatic Fluid Level Control
• Manual Vertical Machine Tank door operation
• Three Piece Hardened 3-Sided Stainless Work Table
• Fine Grain “Dianite” Casting Material
• Split Axis Construction (Table Moves in X, Column Moves in Y)
• Windows 8 Embedded Operating System
• CFAST Compact Flash Card memory with 1GB user program storage
• Fully-Automatic Rough Machining Control covers PM, CM-R and EM functions
• Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
• DC-Servo (Closed Loop) Torque Control Wire Tensioning System
• Linear Motion Guide Ways
• All-Axes Absolute Control System
• Linear Glass Scale Feedback (X-Y- Axes)
• Optical Rotary Encoder Feedback (UV-Z-Axis)
• Scrap Wire Processor (Chopper) (Optional)
• New 14″ AT Annealing Length Improves Threading Reliability
• Inverter Controlled 16-Step Programmable Flushing
• Full Time AEII (Anti-Electrolysis) Power Supply Protection
• Dielectric Fluid Chiller Standard
• Auto-Oiler Lubrication System