SHARP 30120V 30" X 120" EXTRA HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE w/Newall DRO

SHARP 30120V 30" X 120" EXTRA HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE w/ Newall DRO

Like New. 

Swing Over Bed (In.): 30

Swing Over Cross Slide (In.): 19-3/4

Swing Over Gap (In.): 39

Distance Between Centers (In.): 120

Width of Bed (In.): 19

Height of Bed (In.): 15-3/4

Cross Slide Travel (In.): 14-3/4

Compound Slide Travel (In.): 9

Spindle Through Hole Diameter (In.): 4-1/8

Spindle Nose – Camlock: D1-11

Spindle Bore Taper (w/Sleeve): MT-7 (MT-5)

Number of Spindle Speeds: 18

Range of Spindle Speeds (RPM): 10 - 1,200

Range of Longitudinal Feeds (IPR): .0015 - .2

Range of Cross Feeds (IPR): .0006 - .16

Number of Inch Threads: 60

Range of Inch Threads (TPI): 1/4 - 84

Number of Metric Threads: 60

Range of Metric Threads (mm): .2 - 112

Number of Diametral Pitch Threads: 55

Range of Diametral Pitch Threads (DP): 1 - 240

Number of Modular Threads: 55

Range of Modular Threads (MP): .05 - 28

Leadscrew Diameter (In.)       : 1-1/2

Leadscrew Thread Pitch (TPI): 2

Tailstock Quill Travel (In.): 7-1/2

Tailstock Quill Diameter (In.): 3-1/8

Tailstock Quill Taper: MT-5

Main Motor (HP): 15, 220V/440V/3 Phase/60 Hz., Prewired 220V

Power Consumptions (Volts | kVA | Amps): 220 | 15 | 40

Power Consumptions (Volts | kVA | Amps): 440 | 15 | 20

Machine Dimensions (L x W x H/In.): 175 x 56 x 65

Net Weight (Lbs.): 10,210

Standard Equipment:

24” 6 Jaw Chuck

Newall DP700 2 Axis DRO

3 Chip Pans

Steady Rest with Roller Jaws - 8.75" - 13" Capacity

Quick Change Tool Post

4-Way Rapid Traverse

Longitudinal Carriage Stop

Thread Chasing Dial

Halogen Work Light

Foot Brakes

Complete Coolant System

Gap Bed Piece is included

A new is Sharp 30120V (bare bones)  $88,980 (no chuck, no steady, no DRO)