Electro Arc Carbide Metal Disintegrator Model 2-SAC W/ DC Disintegrator Head, New 2014

Electro Arc EDM Machine,

Model 2-SAC ,

Serial Number 15059,

DC Disintegrator Head With Auto Servo Feed, Auto Start and Stop, Depth Stop

Conventional,

Additional Tooling,

Bench,

OPERATING HEAD & SERVO FEED

Precision-spindle disintegrating head operates in any position. Works by making and breaking 120 arcs per second. Manual or servo-controlled operation. Start and Depth Stop switches on the quill block with auto shutoff and 12" (305 mm) continuous rack-and-pinion feed. Graduated feed scale in 1/16" (1 mm) increments. Quill protected by 2 bellows covers. Automatic Servo Feed works at any angle.

SUPPPORT FIXTURE

Column: 36” (914 mm) hard chrome plated, 2 3/4” (70 mm) diameter. Crossarms/head can travel 21” verti-cally. Lift ring for easy transfer across your shop. Permanent magnetic base has 3,000 lb. holding force, released by lever action. Radial Crossarm: Hard-chrome plated, 2 1/4” (52 mm) diameter x 15” (381 mm). Head rotates a full 360 degrees around the crossarm, which swings 360° around the column. Separate manual locks for height and rotation.

BASE/CABINET

Heavy, reinforced frame construction 20 1/8” wide x 22” deep x 39 1/4” high (514 x 558 x 997 mm). Coolant pump and reservoir built in. Pull-out tooling bin with rubber grommets to store collets. Four heavy-duty ball bearing casters.

POWER SUPPLY

Power 480 Volts / 60 Hertz / 3 Phase

Controlled rectified DC cutting power with eleven heat selections. Recessed control panel includes lighted push buttons for Start/Stop, lighted Power On indicator, DC Amp meter for the cutting circuit, rotary switches for Vibration and Coolant Pump, external fuse for the Head Vibration and power supply. Jog switch moves spindle up/down in quill. A resettable thermal circuit breaker protects the Disintegration circuit. Rotary selec-tor switch for cutting power, potentiometer controls for Vibration Amplitude and Servo Feed.

COOLANT SYSTEM

Coolant tank side-mounted for easy cleaning 24” h x 15” w x 6.5” d (609 x 381 x 165 mm). Pump: 2 GPM; 50 PSI; 1/3 HP motor, single phase, 120 volt. Power Coolant Cable (conducts both liquid coolant and low-voltage power): double stranded, woven copper braid with polyvinyl cover. 10-foot (3048 mm) standard.

SHIPPING DATA

Approximate weights: net 470 lb. (213 kg), gross domestic 550 lb. (250 kg), gross export 625 lb. (284 kg). Volume: 23 cu ft (0.651 cu m).

Dimensions 10 Ft. x 3 Ft. x 5 Ft including Table