Electro Arc Metal Disintegrator Model 2S

Electro Arc Metal Disintegrator Model 2S
REMOVE BROKEN TAPS, BOLTS & DRILLS IN MINUTES!
ARC*ER Current Monitoring Disintegrator Head
Arc•er Portable Head
Designed to remove broken tooling from .079” to 3/4” (2 mm to 19.05 mm). Head is 12.5” (317.5 mm) long. Operates at any angle.
LED current monitoring assists the operator to obtain maximum performance and saves on electrode consumption.
The upper end has a 1/2” (12.7 mm) by 2” (50.8 mm) long straight shank arbor which can be held in a 3-point chuck.
Features of all our AC portable machines:
Base/Cabinet
• Holds the power supply, coolant system and control pane
• Heavy-duty casters for easy movement around the shop
• Levelers for stability in operation
Head Support options
• Use existing equipment such as a drill press or milling machine.
Built-in Coolant System
• Provides coolant for the disintegration process
• Internal pump provides 90 psi coolant pressure
• Internal tank with filter
Comes with Cutting oil and Large Table
Electro Arc Model 2S Manual
Model 2-S
Arc•er head makes and breaks sixty arcs per second.
Built-in LED power indicator assists the operator to control feed.
Operates in any position including vertically and horizontally.
Heavy, reinforced frame construction 201/8” wide x 22” deep x 391/4” high (514 x 558 x 997 mm) with push handle, two lift eyes and four heavy-duty ball bearing casters.
Guarded control panel,
lighted,
oil-tight push buttons,
low water level indicator light,
external fuses and master stop switch.
120, 240, 380, 480, or 550 volt.
Disintegrator transformer rating 15 KVA.
Up to 10 cutting heat settings,
depending on transformer selected.
Circuit breaker protection,
Machine Tool electrical standards.
7.4 gal. (28 l) coolant tank.
Wire mesh cartridge filter intake.
Pump 2 GPM,
90 PSI,
1/3 HP motor,
single phase,
120 volt.
Power/Coolant Cable (conducts both liquid coolant and electrical current) double stranded,
woven copper braid with polyvinyl cover. 71/2 ft. (2.3 m) length standard.
Excellent Condition